Lumitek Down Light Aluminum All Black S-ZX085
Aluminum 85 x Height 30mm / 75mm All Black
Show more
Show less
-
Inquire
- |
-
Details
- |
-
Reviews (0)
- |
Aluminum 85 x Height 30mm / 75mm All Black
AVAILABILITY: In stock
595*595*32mm
1. Input voltage: AC90-265V
2. SMD2835
3. CRI: >80Ra
4. Power 40W
5. LED Life Span: >50000 Hours
6. Beam Angle: 120
7. CCT: 6500K
8. Outline Border: White
9. PF>0.9
10.PS Diffuser
11.Philips LED Chips
AVAILABILITY: In stock
Specifications:
Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 50000h
Switching cycle: 50000X
AVAILABILITY: In stock
98mm
1. Input voltage: AC90-265V
2. Power 3W
3. CCT: 6500K
4. Outline Border: White
5. Installation: Recessed
6. Philips LED Chips
AVAILABILITY: In stock
595*595*32mm
1. Input voltage: AC90-265V
2. SMD2835
3. CRI: >80Ra
4. Power 30W
5. LED Life Span: >50000 Hours
6. Beam Angle: 120
7. CCT: 6500K
8. Outline Border: White
9. PF>0.9
10.PS Diffuser
11. Philips LED Chips
AVAILABILITY: In stock
LU-CM6060 600 x 600mm Surface Mounted Frame Aluminum
AVAILABILITY: In stock
Overview:
Osram LED T8 SubstiTUBE Value 5ft in 4000K (840) for EMag/Mains, is an economic LED tube for electromagnetic control gears or direct wire to Mains. A quick, simple and safe replacement without rewiring (comes with jumper starter), offering energy savings of up to 65% (compared to T8 fluorescent lamp on CCG), with a wide 220 beam angle, and luminous efficiency up to 105 lm/W. These tubes provide Instant-on light, therefore ideally suitable in combination with sensor technology. Very high resistance to switching loads. Also suitable for operation at low temperatures (from -20 to 45). Not suitable for operation with electronic/HF control gear.
AVAILABILITY: In stock
This is a Osram LEDvance 5ft 1500mm 19.1w LED T8 Tube with a frosted finish.
These tubes are a direct retrofit for old 58w T8 or 65w T12 fluorescent tubes in switch start fittings as they come complete with a Free LED Starter. All you need to do is simply remove the old tube and starter and replace with the LED tube and starter supplied. They can also be used in high frequency fittings, by bypassing the control gear and wiring the fitting live and neutral to one end only.
AVAILABILITY: In stock
1200*300*32mm
1. Input voltage: AC90-265V
2. SMD2835
3. CRI: >80Ra
4. Power 40W
5. LED Life Span: >50000 Hours
6. Beam Angle: 120
7. CCT: 6500K
8. Outline Border: White
9. PF>0.9
10.PS Diffuser
11.Philips LED Chips
AVAILABILITY: In stock
1200*600*32mm
1. Input voltage: AC90-265V
2. SMD2835
3. CRI: >80Ra
4. Power 56W
5. LED Life Span: >50000 Hours
6. Beam Angle: 120
7. CCT: 4000K
8. Outline Border: White
9. PF>0.9
10.PS Diffuser
11. Philips LED Chips
AVAILABILITY: In stock
Specifications:
Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 50000h
Switching cycle: 50000X
AVAILABILITY: In stock
This is a Osram LEDvance 4ft 1200mm 16.4w LED T8 Tube with a frosted finish.
These tubes are a direct retrofit for old 36w T8 or 40w T12 fluorescent tubes in switch start fittings as they come complete with a Free LED Starter. All you need to do is simply remove the old tube and starter and replace with the LED tube and starter supplied. They can also be used in high frequency fittings, by bypassing the control gear and wiring the fitting live and neutral to one end only.
AVAILABILITY: In stock
98mm
1. Input voltage: AC90-265V
2. Power 3W
3. CCT: 3000K
4. Outline Border: White
5. Installation: Recessed
6. Philips LED Chips
Reviews
There are no reviews yet.