Showing all 17 results

  • View as:
  • Sidebar
  • Sort by:

AVAILABILITY: In stock

VIEW ITEM

Overview

Code: LU-LTL-E27-6055693-5W
Luminous color: Warm White (2,200K)
Base type: E27
Dimmable? Yes
Energy efficiency class: A
Total luminous flux (lm): 260
Power consumption (W): 5W
Average lifetime (hours): 30000
Mercury content (mg Hg): 0.00
Color rendering (Ra): 80
Energy consumption in kWh/1000h: 5.00
Length (cm): 25
Diameter (cm): 3.2
Light output: 260 lm

VIEW ITEM

AVAILABILITY: In stock

VIEW ITEM

Overview

Code: LU-LTL-E27-6055636-4W
Color: Amber
Luminous color: Warm White (2,200K)
Base type: E27
Energy efficiency class: A
Total luminous flux (lm): 230
Power consumption (W): 4W
Average lifetime (hours): 30000
Mercury content (mg Hg): 0.00
Color rendering (Ra): 80
Energy consumption in kWh/1000h: 4.00
Length (cm): 15
Diameter (cm): 3
Light output: 230 lm

VIEW ITEM

AVAILABILITY: In stock

VIEW ITEM

This is a Osram LEDvance 2ft 7.6w LED T8 Tube with a frosted finish.
These tubes are a direct retrofit for old 18w T8 or 20w T12 fluorescent tubes in switch start fittings as they come complete with a Free LED Starter. All you need to do is simply remove the old tube and starter and replace with the LED tube and starter supplied. They can also be used in high frequency fittings, by bypassing the control gear and wiring the fitting live and neutral to one end only.

VIEW ITEM

AVAILABILITY: In stock

VIEW ITEM

This is a Osram LEDvance 4ft 1200mm 16.4w LED T8 Tube with a frosted finish.
These tubes are a direct retrofit for old 36w T8 or 40w T12 fluorescent tubes in switch start fittings as they come complete with a Free LED Starter. All you need to do is simply remove the old tube and starter and replace with the LED tube and starter supplied. They can also be used in high frequency fittings, by bypassing the control gear and wiring the fitting live and neutral to one end only.

VIEW ITEM

AVAILABILITY: In stock

VIEW ITEM

This is a Osram LEDvance 5ft 1500mm 19.1w LED T8 Tube with a frosted finish.
These tubes are a direct retrofit for old 58w T8 or 65w T12 fluorescent tubes in switch start fittings as they come complete with a Free LED Starter. All you need to do is simply remove the old tube and starter and replace with the LED tube and starter supplied. They can also be used in high frequency fittings, by bypassing the control gear and wiring the fitting live and neutral to one end only.

VIEW ITEM

AVAILABILITY: In stock

VIEW ITEM

Overview:

Osram LED T8 SubstiTUBE Value 2ft in 4000K (840) for EMag/Mains, is an economic LED tube for electromagnetic control gears or direct wire to Mains. A quick, simple and safe replacement without rewiring (comes with jumper starter), offering energy savings of up to 65% (compared to T8 fluorescent lamp on CCG), with a wide 220 beam angle, and a luminous efficacy up to 105 lm/W. These tubes provide Instant-on light, therefore ideally suitable in combination with sensor technology. Very high resistance to switching loads. Also suitable for operation at low temperatures (from -20 to 45). Not suitable for operation with electronic/HF control gear.

VIEW ITEM

AVAILABILITY: In stock

VIEW ITEM

Overview:

Osram LED T8 SubstiTUBE Value 4ft in 6500K (865) for EMag/Mains, is an economic LED tube for electromagnetic control gears or direct wire to Mains. A quick, simple and safe replacement without rewiring (comes with jumper starter), offering energy savings of up to 65% (compared to T8 fluorescent lamp on CCG), with a wide 220 beam angle, and luminous efficiency up to 105 lm/W. These tubes provide Instant-on light, therefore ideally suitable in combination with sensor technology. Very high resistance to switching loads. Also suitable for operation at low temperatures (from -20 to 45). Not suitable for operation with electronic/HF control gear.

VIEW ITEM

AVAILABILITY: In stock

VIEW ITEM

Overview:

Osram LED T8 SubstiTUBE Value 5ft in 4000K (840) for EMag/Mains, is an economic LED tube for electromagnetic control gears or direct wire to Mains. A quick, simple and safe replacement without rewiring (comes with jumper starter), offering energy savings of up to 65% (compared to T8 fluorescent lamp on CCG), with a wide 220 beam angle, and luminous efficiency up to 105 lm/W. These tubes provide Instant-on light, therefore ideally suitable in combination with sensor technology. Very high resistance to switching loads. Also suitable for operation at low temperatures (from -20 to 45). Not suitable for operation with electronic/HF control gear.

VIEW ITEM

AVAILABILITY: In stock

VIEW ITEM

Specifications:

Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 50000h
Switching cycle: 50000X

VIEW ITEM

AVAILABILITY: In stock

VIEW ITEM

Specifications:

Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 50000h
Switching cycle: 50000X

VIEW ITEM

AVAILABILITY: In stock

VIEW ITEM

Specifications:

Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 50000h
Switching cycle: 50000X

VIEW ITEM

AVAILABILITY: In stock

VIEW ITEM

Specifications:

Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 50000h
Switching cycle: 50000X

VIEW ITEM

AVAILABILITY: In stock

VIEW ITEM

Specifications:

Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 60000h
Switching cycle: 50000X

VIEW ITEM

AVAILABILITY: In stock

VIEW ITEM

Specifications:

Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 60000h
Switching cycle: 50000X

VIEW ITEM

AVAILABILITY: In stock

VIEW ITEM

Specifications:

Cap base: G13 (Medium Bi-Pin Fluorescent)
EU RoHS compliant: Yes
Nominal lifetime (nom.): 15000h
Switching cycle: 50,000X

VIEW ITEM

AVAILABILITY: In stock

VIEW ITEM

Specifications:

Cap base: G13 (Medium Bi-Pin Fluorescent)
EU RoHS compliant: Yes
Nominal lifetime (nom.): 15000h
Switching cycle: 50,000X

VIEW ITEM

AVAILABILITY: In stock

VIEW ITEM

Specifications:

Cap base: G13 (Medium Bi-Pin Fluorescent)
EU RoHS compliant: Yes
Nominal lifetime (nom.): 15000h
Switching cycle: 50,000X

VIEW ITEM