Schneider Solar Charge Controller Conext MPPT 60 2.5W 150VDC Price in Nairobi Kenya

Solar Charge Controller
Code: LUMI-SCC-ES-865-1030-1
Brand: Schneider
Component: Charge Controller
Power consumption, nighttime: 2.5 W
Nominal battery voltage: 12, 24, 36, 48, 60 V
Battery voltage operating range: 0 Vdc to 80 Vdc
Max PV operating voltage: 140 V
Max. array short-circuit current: 60 A (48 A @ STC)
Max PV array rating: 5250 W
Max. charge current: 60 A (for all battery voltages except 60 V)
Max. output power: 3500 W
Show more
Show less
-
Inquire
- |
-
Details
- |
-
More info
- |
-
Reviews (0)
- |
Solar Charge Controller
Conext MPPT 60 150 PV Solar Charge Controller for MPPT multi-stage charging and better battery life.
The Conext MPPT 60 150 is a photovoltaic (PV) charge controller that tracks the maximum power point of a PV array to deliver the maximum available current for charging batteries. When charging, the MPPT 60 150 regulates battery voltage and output current based on the amount of energy available from the PV array and the state of charge of the battery.
Higher return on investment
– Maximum Power Point Tracking (MPPT) algorithm continually seeks the maximum power available from the PV array
– Improve battery life with selectable multi-stage temperature-compensated charging
– Five-year standard warranty
Flexible
– Stand-alone application or full integration with Conext XW Pro, XW, and SW inverter chargers
– Compatible with any brand of PV module
– Remote monitoring available
Easy to install
– Configurable auxiliary output
– LCD screen with faceplate buttons for configuration and system monitoring
– Integrated PV ground fault protection for negative grounded arrays
Electrical specifications
Nominal battery voltage: 12, 24, 36, 48, 60 V
Battery voltage operating range: 0 Vdc to 80 Vdc
Min. PV operating voltage: Battery voltage +5 V
Max PV operating voltage: 140 V
Max. PV array open circuit voltage: 150 V including temperature correction factor
Max. array short-circuit current: 60 A (48 A @ STC)
Max PV array rating: 5250 W
Max. charge current: 60 A (for all battery voltages except 60 V)
Max. and min. wire size in conduit: #6 AWG to #14 AWG (10 to 2.5 square millimeters)
Max. output power: 3500 W
Charger regulation method: Three-stage (bulk, absorption, float) plus manual equalization. Two-stage (bulk, absorption) plus manual equalization
Supported battery types: Flooded, GEL, AGM, Custom
Efficiency
Max. power conversion efficiency: 93% (nominal 12 V), 96% (nominal 24 V), 97% (nominal 36 V), 98% (nominal 48 V), 99% (nominal 60 V)
General specifications
Power consumption, nighttime: 2.5 W
Battery temperature sensor: Included
Auxiliary output: 5 – 13 V, up to 200 mA
Enclosure material: Indoor, ventilated, sheet metal chassis with 2.2 cm and 2.8 cm (7/8 in and 1 in) knockouts and aluminum heat-sink
IP degree of protection: IP20
Product weight: 4.8 kg (10.8 lb)
Shipping weight: 8.0 kg (17.6 lb)
Product dimensions (H x W x D): 36.8 x 14.6 x 13.8 cm (14.5 × 5.8 × 5.5 in)
Shipping dimensions (H x W x D): 48.3 x 22.9 x 35 cm (19.0 × 9.0 × 9.8 in)
Device mounting: Vertical wall mount
Ambient air temperature for operation: -20 to 45 degrees Celsius
Storage temperature range: -40 to 85 degrees celsius full power, power derating above 45 degrees Celsius
Operating altitude: Sea level to 2000 m (6562 ft)
System network and remote monitoring: Available with Insight Energy Management
OEM: 865-1030-1
Code: LUMI-SCC-ES-865-1030-1
Brand: Schneider
Component: Charge Controller
OEM: ES-865-1030-1
PDF Download(s): Datasheet
Weight | 6.2 kg |
---|---|
Dimensions | 488 × 245 × 238 mm |
AVAILABILITY: In stock
Integrated Solar Street Light
Code: LU-ISSL-5W-12W
Power Consumption: 5W – 12W
Mono Solar Panel, over 100 lm/W Bridge lux LED adopted
Long service time Lithium-Iron phosphate battery
AVAILABILITY: In stock
Solar Street Light
Code: LU-SSL-60W-220W-8M
Solar Street Light 60/220 Watts 8 meters available here online in Kenya
Power Consumption: 60W-220W
Different models of LED street light and pole set available
Automatic on/off, light/time intelligent control, dimmable mode
AVAILABILITY: In stock
Solar Battery
Code: LU-SB-R
This 12 volt 18 Amp/hour battery is suitable for a select number of our light systems. Check your systems specifications to determine the appropriate replacement battery. Each battery is sold as a single unit. This is a sealed lead acid battery suited for some our lighting systems. If you are unsure about the correct battery specifications, check the information on the existing battery, or check your systems specifications. Each battery is sold and priced as a single unit. The battery color and battery manufacturer may vary.
AVAILABILITY: In stock
Solar Panel
Code: LU-SP-7W-12V-DC
Power: 7w – 12v
7 Watt 12 Volt Solar Panel
This is a universal 12 volt dc / 7 watt solar panel suitable for a variety of applications. Supplied with tempered glass and an aluminum frame. Easy ve and -ve connection to the terminal block located on the back of the solar panel.
AVAILABILITY: In stock
Solar Charge Controller
Code: LU-SCC-12V-24V-MPPT-01
Power: 12v – 24v
This is the most sophisticated MPPT Solar Charge Controller and Light Activator offered by Solar Illuminations. This programmable controller regulates and manages the solar panel power, battery power, and controls lighting activation. It also offers a variety of unique features not offered by other MPPT Charge Controllers. It automatically recognizes 12V or 24V battery configurations and can handle up to 100V of solar panel input with a maximum of 10A. The light activator has multiple modes including manual on/off, dust to dawn, timer mode, and dual timer mode. MPPT Charge Controllers are typically 30% more efficient than a regular PWM solar charge controllers. This is the best technology for large solar systems requiring the most efficient technology.
AVAILABILITY: In stock
Solar Garden Light
Code: LU-SGL-12W-35W-3.5M
Power Consumption: 12W-35W
High efficiency polycrystalline solar panel
Durable, shockproof, safe actual application
Soft, anti-glare design, High brightness LED light source
AVAILABILITY: In stock
Solar Panel
Code: LU-SP-10W-12V-DC
Power: 10w – 12v
10 Watt 12 Volt Solar Panel
This is a universal 12 volt dc / 10 watt solar panel suitable for a variety of applications. Supplied with tempered glass and an aluminum frame. Easy ve and -ve connection to the terminal block located on the back of the solar panel.
AVAILABILITY: In stock
Solar Garden Light
Code: LU-SGL-9W-30W-3.5M
Power Consumption: 9W-30W
High efficiency polycrystalline solar panel
Durable, shockproof, safe actual application
Soft, anti-glare design, High brightness LED light source
AVAILABILITY: In stock
Solar Battery
Code: LU-SB-RR-B
This 12 volt 9 Amp/Hour seal lead acid battery is mainly used for our Balmorals series of solar lights. Each battery is sold as a single unit. This is a sealed lead acid battery suited for our Balmorals collection of solar lights. If you are unsure about the correct battery specifications, check the information on the existing battery, or check your systems specifications. Each battery is sold and priced as a single unit. The battery color and battery manufacturer may vary.
AVAILABILITY: In stock
Solar Panel
Code: LU-SP-5W-12V-DC
Power: 5w – 12v
5 Watt 12 Volt Solar Panel
This is a universal 12 volt dc / 5 watt solar panel suitable for a variety of applications. Supplied with tempered glass and an aluminum frame. Easy ve and -ve connection to the terminal block located on the back of the solar panel.
AVAILABILITY: In stock
Solar Panel
Code: LU-SP-20W-12V-DC
Power: 20w – 12v
20 Watt 12 Volt Solar Panel
This is a universal 12 volt dc / 20 watt solar panel suitable for a variety of applications. Supplied with tempered glass and an aluminum frame. Easy ve and -ve connection to the terminal block located on the back of the solar panel.
AVAILABILITY: In stock
Solar Panel
Code: LU-SP-100W-12V-DC
Power: 100w – 12v
100 Watt 12 Volt Solar Panel
This is a universal 12 volt dc / 100 watt solar panel suitable for a variety of applications. Supplied with tempered glass and an aluminum frame. Easy ve and -ve connection to the terminal block located on the back of the solar panel.
Reviews
There are no reviews yet.