Schneider Solar Charge Controller Conext MPPT 60 2.5W 150VDC Price in Nairobi Kenya


SKU: LUMI-SCC-ES-865-1030-1 Category: Suitable Solution For: Brand:

Solar Charge Controller

Code: LUMI-SCC-ES-865-1030-1

Brand: Schneider

Component: Charge Controller

Power consumption, nighttime: 2.5 W

Nominal battery voltage: 12, 24, 36, 48, 60 V

Battery voltage operating range: 0 Vdc to 80 Vdc

Max PV operating voltage: 140 V

Max. array short-circuit current: 60 A (48 A @ STC)

Max PV array rating: 5250 W

Max. charge current: 60 A (for all battery voltages except 60 V)

Max. output power: 3500 W

Show more

Show less

Solar Charge Controller

Conext MPPT 60 150 PV Solar Charge Controller for MPPT multi-stage charging and better battery life.

The Conext MPPT 60 150 is a photovoltaic (PV) charge controller that tracks the maximum power point of a PV array to deliver the maximum available current for charging batteries. When charging, the MPPT 60 150 regulates battery voltage and output current based on the amount of energy available from the PV array and the state of charge of the battery.

Higher return on investment

– Maximum Power Point Tracking (MPPT) algorithm continually seeks the maximum power available from the PV array

– Improve battery life with selectable multi-stage temperature-compensated charging

– Five-year standard warranty

Flexible

– Stand-alone application or full integration with Conext XW Pro, XW, and SW inverter chargers

– Compatible with any brand of PV module

– Remote monitoring available

Easy to install

– Configurable auxiliary output

– LCD screen with faceplate buttons for configuration and system monitoring

– Integrated PV ground fault protection for negative grounded arrays

Electrical specifications

Nominal battery voltage: 12, 24, 36, 48, 60 V

Battery voltage operating range: 0 Vdc to 80 Vdc

Min. PV operating voltage: Battery voltage +5 V

Max PV operating voltage: 140 V

Max. PV array open circuit voltage: 150 V including temperature correction factor

Max. array short-circuit current: 60 A (48 A @ STC)

Max PV array rating: 5250 W

Max. charge current: 60 A (for all battery voltages except 60 V)

Max. and min. wire size in conduit: #6 AWG to #14 AWG (10 to 2.5 square millimeters)

Max. output power: 3500 W

Charger regulation method: Three-stage (bulk, absorption, float) plus manual equalization. Two-stage (bulk, absorption) plus manual equalization

Supported battery types: Flooded, GEL, AGM, Custom

Efficiency

Max. power conversion efficiency: 93% (nominal 12 V), 96% (nominal 24 V), 97% (nominal 36 V), 98% (nominal 48 V), 99% (nominal 60 V)

General specifications

Power consumption, nighttime: 2.5 W

Battery temperature sensor: Included

Auxiliary output: 5 – 13 V, up to 200 mA

Enclosure material: Indoor, ventilated, sheet metal chassis with 2.2 cm and 2.8 cm (7/8 in and 1 in) knockouts and aluminum heat-sink

IP degree of protection: IP20

Product weight: 4.8 kg (10.8 lb)

Shipping weight: 8.0 kg (17.6 lb)

Product dimensions (H x W x D): 36.8 x 14.6 x 13.8 cm (14.5 × 5.8 × 5.5 in)

Shipping dimensions (H x W x D): 48.3 x 22.9 x 35 cm (19.0 × 9.0 × 9.8 in)

Device mounting: Vertical wall mount

Ambient air temperature for operation: -20 to 45 degrees Celsius

Storage temperature range: -40 to 85 degrees celsius full power, power derating above 45 degrees Celsius

Operating altitude: Sea level to 2000 m (6562 ft)

System network and remote monitoring: Available with Insight Energy Management

OEM: 865-1030-1

Code: LUMI-SCC-ES-865-1030-1

Brand: Schneider

Component: Charge Controller

OEM: ES-865-1030-1

PDF Download(s): Datasheet

Weight6.2 kg
Dimensions488 × 245 × 238 mm

Reviews

There are no reviews yet.

Be the first to review “Schneider Solar Charge Controller Conext MPPT 60 2.5W 150VDC Price in Nairobi Kenya”

Your email address will not be published. Required fields are marked *