Schneider Solar Charge Controller Conext MPPT 60 2.5W 150VDC Price in Nairobi Kenya
Solar Charge Controller
Code: LUMI-SCC-ES-865-1030-1
Brand: Schneider
Component: Charge Controller
Power consumption, nighttime: 2.5 W
Nominal battery voltage: 12, 24, 36, 48, 60 V
Battery voltage operating range: 0 Vdc to 80 Vdc
Max PV operating voltage: 140 V
Max. array short-circuit current: 60 A (48 A @ STC)
Max PV array rating: 5250 W
Max. charge current: 60 A (for all battery voltages except 60 V)
Max. output power: 3500 W
Show more
Show less
-
Inquire
- |
-
Details
- |
-
More info
- |
-
Reviews (0)
- |
Solar Charge Controller
Conext MPPT 60 150 PV Solar Charge Controller for MPPT multi-stage charging and better battery life.
The Conext MPPT 60 150 is a photovoltaic (PV) charge controller that tracks the maximum power point of a PV array to deliver the maximum available current for charging batteries. When charging, the MPPT 60 150 regulates battery voltage and output current based on the amount of energy available from the PV array and the state of charge of the battery.
Higher return on investment
– Maximum Power Point Tracking (MPPT) algorithm continually seeks the maximum power available from the PV array
– Improve battery life with selectable multi-stage temperature-compensated charging
– Five-year standard warranty
Flexible
– Stand-alone application or full integration with Conext XW Pro, XW, and SW inverter chargers
– Compatible with any brand of PV module
– Remote monitoring available
Easy to install
– Configurable auxiliary output
– LCD screen with faceplate buttons for configuration and system monitoring
– Integrated PV ground fault protection for negative grounded arrays
Electrical specifications
Nominal battery voltage: 12, 24, 36, 48, 60 V
Battery voltage operating range: 0 Vdc to 80 Vdc
Min. PV operating voltage: Battery voltage +5 V
Max PV operating voltage: 140 V
Max. PV array open circuit voltage: 150 V including temperature correction factor
Max. array short-circuit current: 60 A (48 A @ STC)
Max PV array rating: 5250 W
Max. charge current: 60 A (for all battery voltages except 60 V)
Max. and min. wire size in conduit: #6 AWG to #14 AWG (10 to 2.5 square millimeters)
Max. output power: 3500 W
Charger regulation method: Three-stage (bulk, absorption, float) plus manual equalization. Two-stage (bulk, absorption) plus manual equalization
Supported battery types: Flooded, GEL, AGM, Custom
Efficiency
Max. power conversion efficiency: 93% (nominal 12 V), 96% (nominal 24 V), 97% (nominal 36 V), 98% (nominal 48 V), 99% (nominal 60 V)
General specifications
Power consumption, nighttime: 2.5 W
Battery temperature sensor: Included
Auxiliary output: 5 – 13 V, up to 200 mA
Enclosure material: Indoor, ventilated, sheet metal chassis with 2.2 cm and 2.8 cm (7/8 in and 1 in) knockouts and aluminum heat-sink
IP degree of protection: IP20
Product weight: 4.8 kg (10.8 lb)
Shipping weight: 8.0 kg (17.6 lb)
Product dimensions (H x W x D): 36.8 x 14.6 x 13.8 cm (14.5 × 5.8 × 5.5 in)
Shipping dimensions (H x W x D): 48.3 x 22.9 x 35 cm (19.0 × 9.0 × 9.8 in)
Device mounting: Vertical wall mount
Ambient air temperature for operation: -20 to 45 degrees Celsius
Storage temperature range: -40 to 85 degrees celsius full power, power derating above 45 degrees Celsius
Operating altitude: Sea level to 2000 m (6562 ft)
System network and remote monitoring: Available with Insight Energy Management
OEM: 865-1030-1
Code: LUMI-SCC-ES-865-1030-1
Brand: Schneider
Component: Charge Controller
OEM: ES-865-1030-1
PDF Download(s): Datasheet
| Weight | 6.2 kg |
|---|---|
| Dimensions | 488 × 245 × 238 mm |
AVAILABILITY: In stock
Integrated Solar Street Light
Code: LU-ISSL-5W-12W
Power Consumption: 5W – 12W
Mono Solar Panel, over 100 lm/W Bridge lux LED adopted
Long service time Lithium-Iron phosphate battery
AVAILABILITY: In stock
Solar Charge Controller
Code: LU-SCC-12V-24V-PWM-01
Power: 12v – 24v
This PWM type charge controller is suitable for 12 volt or 24 volt DC panels. We offer a choice of 3 Amp, 5 Amp or 10 Amp versions. It can be used as a standalone charge controller or the solar panel can act as a photocell for controlled lighting use.
AVAILABILITY: In stock
Solar Panel
Code: LU-SP-6W-12V-DC
Power: 6w – 12v
6 Watt 12 Volt Solar Panel
This is a universal 12 volt dc / 6 watt solar panel suitable for a variety of applications. Supplied with tempered glass and an aluminum frame. Easy ve and -ve connection to the terminal block located on the back of the solar panel.
AVAILABILITY: In stock
Solar Panel
Code: LU-SP-40W-12V-DC
Power: 40w – 12v
40 Watt 12 Volt Solar Panel
This is a universal 12 volt dc / 40 watt solar panel suitable for a variety of applications. Supplied with tempered glass and an aluminum frame. Easy ve and -ve connection to the terminal block located on the back of the solar panel.
AVAILABILITY: In stock
Solar Battery
Code: LU-SB-R
This 12 volt 18 Amp/hour battery is suitable for a select number of our light systems. Check your systems specifications to determine the appropriate replacement battery. Each battery is sold as a single unit. This is a sealed lead acid battery suited for some our lighting systems. If you are unsure about the correct battery specifications, check the information on the existing battery, or check your systems specifications. Each battery is sold and priced as a single unit. The battery color and battery manufacturer may vary.
AVAILABILITY: In stock
Solar Street Light
Code: LU-SSL-30W-100W-5M
Solar Street Light 30/100 Watts-5 meters available here in Kenya
Power Consumption: 30W-100W
Different models of LED street light and pole set available
Automatic on/off, light/time intelligent control, dimmable mode
AVAILABILITY: In stock
Solar Panel
Code: LU-SP-100W-12V-DC
Power: 100w – 12v
100 Watt 12 Volt Solar Panel
This is a universal 12 volt dc / 100 watt solar panel suitable for a variety of applications. Supplied with tempered glass and an aluminum frame. Easy ve and -ve connection to the terminal block located on the back of the solar panel.
AVAILABILITY: In stock
Integrated Solar Street Light
Code: LU-ISSL-20W-45W
Power Consumption: 20W-45W
Mono Solar Panel, over 100 lm/W Bridge lux LED adopted
Long service time Lithium-Iron phosphate battery
AVAILABILITY: In stock
Solar Panel
Code: LU-SP-14W-12V-DC
Power: 14w – 12v
14 Watt 12 Volt Solar Panel
This is a universal 12 volt dc / 14 watt solar panel suitable for a variety of applications. Supplied with tempered glass and an aluminum frame. Easy ve and -ve connection to the terminal block located on the back of the solar panel.
AVAILABILITY: In stock
Integrated Solar Street Light
Code: LU-ISSL-15W
Power Consumption: 15W
Mono Solar Panel, over 100 lm/W Bridge lux LED adopted
Long service time Lithium-Iron phosphate battery
AVAILABILITY: In stock
Solar Charge Controller
Code: LU-SCC-12V-24V-PWM-02
Power: 12v – 24v
This PWM type charge controller is suitable for 12 volt or 24 volt DC panels and has a dual timer option. Rated at 20 Amp max. It can be used as a standalone charge controller or the solar panel can act as a photocell for controlled lighting use. This control module offers a dual timer mode which allows two on/off times per night, dusk till dawn, and standard single time mode. For example this control module in dual timer mode will allow a light to run from sun set for x hours (2-7 hours), off for a calculated time, and back on x hours (1-5 hours) before sun rise. The calculated off time is automatically determined by the charge controller based on the previous night’s characteristic.
AVAILABILITY: In stock
Solar Street Light
Code: LU-SSL-120W-360W-10M
Power Consumption: 120W-360W
Different models of LED street light and pole set available
Automatic on/off, light/time intelligent control, dimmable mode
















Reviews
There are no reviews yet.