Schneider Conext CL20000E 3P Inverter + Essential Price in Nairobi Kenya

Solar Garden Light

Code: LU-SGL-12W-35W-3.5M

Power Consumption: 12W-35W

High efficiency polycrystalline solar panel

Durable, shockproof, safe actual application

Soft, anti-glare design, High brightness LED light source

Solar Street Light

Code: LU-SSL-20W-70W-4M

Solar Street Light 20-70 Watts 4 meters available here in Kenya

Power Consumption: 20W-70W

Different models of LED street light and pole set available

Automatic on/off, light/time intelligent control, dimmable mode

Solar Panel

Code: LU-SP-5W-12V-DC

Power: 5w – 12v

5 Watt 12 Volt Solar Panel

This is a universal 12 volt dc / 5 watt solar panel suitable for a variety of applications. Supplied with tempered glass and an aluminum frame. Easy ve and -ve connection to the terminal block located on the back of the solar panel.

Integrated Solar Street Light

Code: LU-ISSL-15W

Power Consumption: 15W

Mono Solar Panel, over 100 lm/W Bridge lux LED adopted

Long service time Lithium-Iron phosphate battery

Solar Battery

Code: LU-SB-R

This 12 volt 18 Amp/hour battery is suitable for a select number of our light systems. Check your systems specifications to determine the appropriate replacement battery. Each battery is sold as a single unit. This is a sealed lead acid battery suited for some our lighting systems. If you are unsure about the correct battery specifications, check the information on the existing battery, or check your systems specifications. Each battery is sold and priced as a single unit. The battery color and battery manufacturer may vary.

Solar Charge Controller

Code: LU-SCC-12V-24V-PWM-02

Power: 12v – 24v

This PWM type charge controller is suitable for 12 volt or 24 volt DC panels and has a dual timer option. Rated at 20 Amp max. It can be used as a standalone charge controller or the solar panel can act as a photocell for controlled lighting use. This control module offers a dual timer mode which allows two on/off times per night, dusk till dawn, and standard single time mode. For example this control module in dual timer mode will allow a light to run from sun set for x hours (2-7 hours), off for a calculated time, and back on x hours (1-5 hours) before sun rise. The calculated off time is automatically determined by the charge controller based on the previous night’s characteristic.

Solar Street Light

Code: LU-SSL-50W-180W-7M

Solar Street Light 50W/180 Watts-7 meters available here in Kenya

Power Consumption: 50W-180W

Different models of LED street light and pole set available

Automatic on/off, light/time intelligent control, dimmable mode

Solar Charge Controller

Code: LU-SCC-12V-24V-MPPT-02

Power: 12v – 24v

This MPPT type charge controller is suitable for 12 volt or 24 volt DC panels. Maximum rating is 20 Amps. Typically at least 30% more efficient than regular PWM charge controllers. Far more efficient than a regular PWM solar charge controller. This programmable control module regulates and manages the solar panel power, battery power, and controls charging. It is easy to install and can be used on 12 volt or 24 volt systems.

Solar Street Light

Code: LU-SSL-40W-140W-6M

Solar Street Light 40/140 Watts 6 meters available here in Kenya

Power Consumption: 40W-140W

Different models of LED street light and pole set available

Automatic on/off, light/time intelligent control, dimmable mode

Solar Street Light

Code: LU-SSL-120W-360W-10M

Power Consumption: 120W-360W

Different models of LED street light and pole set available

Automatic on/off, light/time intelligent control, dimmable mode

Solar Garden Light

Code: LU-SGL-9W-30W-3.5M

Power Consumption: 9W-30W

High efficiency polycrystalline solar panel

Durable, shockproof, safe actual application

Soft, anti-glare design, High brightness LED light source

Solar Panel

Code: LU-SP-10W-12V-DC

Power: 10w – 12v

10 Watt 12 Volt Solar Panel

This is a universal 12 volt dc / 10 watt solar panel suitable for a variety of applications. Supplied with tempered glass and an aluminum frame. Easy ve and -ve connection to the terminal block located on the back of the solar panel.