Lumitek Brass Ceiling Light with Matt Opal Shade 6x30W
Overview
Code: LU-CL-MT6026-XL
Name: Ceiling
Watt: 6x30W
Color: Brass
Shade: Matt Opal
Size (mm): 550 x 100
Show more
Show less
-
Inquire
- |
-
Details
- |
-
Reviews (0)
- |
Product Description
IP Rating: IP20
Color: Brass
Installation: Ceiling
Material: Metal and Glass
Power Consumption: 6x30W
Power Source: E27
Driver: –
Operating Temperature: -20 till 40
Dimmable: NO
Lifetime: –
Photometric Data
LED Type: –
Luminous Flux: –
Color Temperature: –
Beam Angle: –
UGR: –
AVAILABILITY: In stock
This is a Osram LEDvance 5ft 1500mm 19.1w LED T8 Tube with a frosted finish.
These tubes are a direct retrofit for old 58w T8 or 65w T12 fluorescent tubes in switch start fittings as they come complete with a Free LED Starter. All you need to do is simply remove the old tube and starter and replace with the LED tube and starter supplied. They can also be used in high frequency fittings, by bypassing the control gear and wiring the fitting live and neutral to one end only.
AVAILABILITY: In stock
Specifications:
Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 50000h
Switching cycle: 50000X
AVAILABILITY: In stock
Overview:
Areas of Application: Office, indoor, school, mark
Lamp Body Material: Iron
Warranty (Years): 2
AVAILABILITY: In stock
Overview:
Areas of Application: Office, indoor, school, mark
Lamp Body Material: Iron
Warranty (Years): 2
AVAILABILITY: In stock
Specifications:
Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 60000h
Switching cycle: 50000X
AVAILABILITY: In stock
Overview:
Osram LED T8 SubstiTUBE Value 5ft in 4000K (840) for EMag/Mains, is an economic LED tube for electromagnetic control gears or direct wire to Mains. A quick, simple and safe replacement without rewiring (comes with jumper starter), offering energy savings of up to 65% (compared to T8 fluorescent lamp on CCG), with a wide 220 beam angle, and luminous efficiency up to 105 lm/W. These tubes provide Instant-on light, therefore ideally suitable in combination with sensor technology. Very high resistance to switching loads. Also suitable for operation at low temperatures (from -20 to 45). Not suitable for operation with electronic/HF control gear.
AVAILABILITY: In stock
Overview:
Areas of Application: Bedroom living room hotel
Color: Gold
Item Type: Postmodern, Modern, Luxury Wall Lamp
Lamp Body Material: Glass and stainless steel
Light Source: E14 bulbs
Lighting Solution Services Available: Lighting and circuitry design. (For these additional services, please fill in the Inquire Form below to get assistance and the best quote)
Material: glass and stainless steel
Shade Material: Glass
Size: 200 x 600mm
Warranty (Year): 2-Year
AVAILABILITY: In stock
Specifications:
Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 50000h
Switching cycle: 50000X
AVAILABILITY: In stock
Specifications:
Cap base: G13 (Medium Bi-Pin Fluorescent)
EU RoHS compliant: Yes
Nominal lifetime (nom.): 15000h
Switching cycle: 50,000X
AVAILABILITY: In stock
Specifications:
Cap base: G13 (Medium Bi-Pin Fluorescent)
EU RoHS compliant: Yes
Nominal lifetime (nom.): 15000h
Switching cycle: 50,000X
AVAILABILITY: In stock
Overview:
Osram LED T8 SubstiTUBE Value 4ft in 6500K (865) for EMag/Mains, is an economic LED tube for electromagnetic control gears or direct wire to Mains. A quick, simple and safe replacement without rewiring (comes with jumper starter), offering energy savings of up to 65% (compared to T8 fluorescent lamp on CCG), with a wide 220 beam angle, and luminous efficiency up to 105 lm/W. These tubes provide Instant-on light, therefore ideally suitable in combination with sensor technology. Very high resistance to switching loads. Also suitable for operation at low temperatures (from -20 to 45). Not suitable for operation with electronic/HF control gear.
AVAILABILITY: In stock
This is a Osram LEDvance 2ft 7.6w LED T8 Tube with a frosted finish.
These tubes are a direct retrofit for old 18w T8 or 20w T12 fluorescent tubes in switch start fittings as they come complete with a Free LED Starter. All you need to do is simply remove the old tube and starter and replace with the LED tube and starter supplied. They can also be used in high frequency fittings, by bypassing the control gear and wiring the fitting live and neutral to one end only.
Reviews
There are no reviews yet.