Overview:
Osram LED T8 SubstiTUBE Value 5ft in 4000K (840) for EMag/Mains, is an economic LED tube for electromagnetic control gears or direct wire to Mains. A quick, simple and safe replacement without rewiring (comes with jumper starter), offering energy savings of up to 65% (compared to T8 fluorescent lamp on CCG), with a wide 220 beam angle, and luminous efficiency up to 105 lm/W. These tubes provide Instant-on light, therefore ideally suitable in combination with sensor technology. Very high resistance to switching loads. Also suitable for operation at low temperatures (from -20 to 45). Not suitable for operation with electronic/HF control gear.
Specifications:
Cap base: G13 (Medium Bi-Pin Fluorescent)
EU RoHS compliant: Yes
Nominal lifetime (nom.): 15000h
Switching cycle: 50,000X
Overview:
Areas of Application: Office, indoor, school, mark etc.
Lamp Body Material: Iron
Warranty (Years): 2
Specifications:
Cap base: G13 (Medium Bi-Pin Fluorescent)
EU RoHS compliant: Yes
Nominal lifetime (nom.): 15000h
Switching cycle: 50,000X
Overview:
Areas of Application: Office, indoor, school, mark
Lamp Body Material: Iron
Warranty (Years): 2
Specifications:
Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 50000h
Switching cycle: 50000X
Specifications:
Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 50000h
Switching cycle: 50000X
This is a Osram LEDvance 2ft 7.6w LED T8 Tube with a frosted finish.
These tubes are a direct retrofit for old 18w T8 or 20w T12 fluorescent tubes in switch start fittings as they come complete with a Free LED Starter. All you need to do is simply remove the old tube and starter and replace with the LED tube and starter supplied. They can also be used in high frequency fittings, by bypassing the control gear and wiring the fitting live and neutral to one end only.
Overview:
Osram LED T8 SubstiTUBE Value 4ft in 6500K (865) for EMag/Mains, is an economic LED tube for electromagnetic control gears or direct wire to Mains. A quick, simple and safe replacement without rewiring (comes with jumper starter), offering energy savings of up to 65% (compared to T8 fluorescent lamp on CCG), with a wide 220 beam angle, and luminous efficiency up to 105 lm/W. These tubes provide Instant-on light, therefore ideally suitable in combination with sensor technology. Very high resistance to switching loads. Also suitable for operation at low temperatures (from -20 to 45). Not suitable for operation with electronic/HF control gear.
Overview:
Areas of Application: Office, indoor, school, mark etc.
Lamp Body Material: Iron
Warranty (Years): 2
Overview:
Areas of Application: Bedroom living room hotel
Color: Gold
Item Type: Postmodern, Modern, Luxury Wall Lamp
Lamp Body Material: Glass and stainless steel
Light Source: E14 bulbs
Lighting Solution Services Available: Lighting and circuitry design. (For these additional services, please fill in the Inquire Form below to get assistance and the best quote)
Material: glass and stainless steel
Shade Material: Glass
Size: 200 x 600mm
Warranty (Year): 2-Year
Overview:
Areas of Application: Office, Hotel, Home
Carton Size: 126 x 20 x 17.5
Certification: CCC, CE, ETL, LVD, RoHS, SAA
Input Voltage (V): AC85-265V
IP Rating: IP33
Item Type: LED tube light bracket
Item Types: 0.6m 8W, 0.9m 12W, 1.2m 16W
Lamp Body Material: Metal
Warranty (Year): 1-Year
Warranty (Years): 3
Working Lifetime (Hour): 50000
Working Temperature (): -15 to 45
Reviews
There are no reviews yet.