Osram LED Bulb 7W E27
Technical Parameters:
Color: Warm White (3000K)
Certifications: CE
CRI: Ra 80%
Heating Time: < 1s
Ignition Time: < 0.5s
Beam Angle: 270
Luminous flux: 560 lm
On/Off Cycles: > 15000
Voltage: 230V
Replacement: 45W
Power consumption: 7W
LED type: SMD 2835
Socket: E27
Dimmer: No
Power factor: > 50
Lumen maintenance: > 70%
Dimension: 60 x 120mm
Lifespan: 20000h
Show more
Show less
-
Inquire
- |
-
Details
- |
-
Reviews (0)
- |
TECHNICAL PARAMETERS:
Color: Warm White (3000K)
Certifications: CE
CRI: Ra 80%
Heating Time: < 1s
Ignition Time: < 0.5s
Beam Angle: 270
Luminous flux: 560 lm
On/Off Cycles: > 15000
Voltage: 230V
Replacement: 45W
Power consumption: 7W
LED type: SMD 2835
Socket: E27
Dimmer: No
Power factor: > 50
Lumen maintenance: > 70%
Dimension: 60 x 120mm
Lifespan: 20000h
AVAILABILITY: In stock
Specifications:
Cap base: G13 (Medium Bi-Pin Fluorescent)
EU RoHS compliant: Yes
Nominal lifetime (nom.): 15000h
Switching cycle: 50,000X
AVAILABILITY: In stock
Overview:
Areas of Application: LED bulb light
Base Type: E27, B22, E14, E12, E26
Beam Angle (): 360
Certification: CE, EMC, ETL, GS, LVD, RoHS
Color Rendering Index – CRI (Ra>): 80
Color Temperature (CCT): 2700K-6500K, 3000K-6000K
Input Voltage (V): 220V-110V
Is dimmer supported? Yes
Item Type: Globe
Lamp Body Material: Glass and Aluminum
Lamp Luminous Flux (lm): 820
LED filament: Spiral, Straight
LED Light Source: SMD
Lifespan (hours): 50000
Light Source: LED
Lighting Solution Services Available: Lighting and circuitry design, Project Installation. (For these additional services, please fill in the Inquire Form below to get assistance and the best quote)
Lumen: 110 lm/W
Power optional: 2w, 4w, 6w, 8w, 10w, 12w
Power Supply: DC
Power: 8w
Product Name: LED Bulb Lamp G125 filament bulb
Size: Diameter 125 x 160mm
Warranty (Year): 2-Year
Working Lifetime (Hour): 50000
Working Temperature (): -20 to 40
Working Time (hours): 50000
AVAILABILITY: In stock
Overview
Code: LU-FLB-E27-9993042-6W
Material: Glass
Luminous color: Warm White (2,200K)
Base type: E27
Energy efficiency class: A
Total luminous flux (lm): 500
Power consumption (W): 6
Average lifetime (hours): 15000
Watts replaced over traditional light bulbs: 42
Mercury content (mg Hg): 0.00
Color rendering (Ra): 80
Energy consumption in kWh/1000h: 6.00
Length (cm): 13.6
Diameter (cm): 9.5
Light output: 500 lm
AVAILABILITY: In stock
Osram LED light source is an excellent replacement for traditional and halogen bulbs.
AVAILABILITY: In stock
Specifications:
Cap base: G13 (Medium Bi-Pin Fluorescent)
EU RoHS compliant: Yes
Nominal lifetime (nom.): 15000h
Switching cycle: 50,000X
AVAILABILITY: In stock
Overview:
Osram LED T8 SubstiTUBE Value 4ft in 6500K (865) for EMag/Mains, is an economic LED tube for electromagnetic control gears or direct wire to Mains. A quick, simple and safe replacement without rewiring (comes with jumper starter), offering energy savings of up to 65% (compared to T8 fluorescent lamp on CCG), with a wide 220 beam angle, and luminous efficiency up to 105 lm/W. These tubes provide Instant-on light, therefore ideally suitable in combination with sensor technology. Very high resistance to switching loads. Also suitable for operation at low temperatures (from -20 to 45). Not suitable for operation with electronic/HF control gear.
AVAILABILITY: In stock
Specifications:
Cap base: G13 (Medium Bi-Pin Fluorescent)
EU RoHS compliant: Yes
Nominal lifetime (nom.): 15000h
Switching cycle: 50,000X
AVAILABILITY: In stock
This is a Osram LEDvance 4ft 1200mm 16.4w LED T8 Tube with a frosted finish.
These tubes are a direct retrofit for old 36w T8 or 40w T12 fluorescent tubes in switch start fittings as they come complete with a Free LED Starter. All you need to do is simply remove the old tube and starter and replace with the LED tube and starter supplied. They can also be used in high frequency fittings, by bypassing the control gear and wiring the fitting live and neutral to one end only.
AVAILABILITY: In stock
Overview:
Osram LED T8 SubstiTUBE Value 5ft in 4000K (840) for EMag/Mains, is an economic LED tube for electromagnetic control gears or direct wire to Mains. A quick, simple and safe replacement without rewiring (comes with jumper starter), offering energy savings of up to 65% (compared to T8 fluorescent lamp on CCG), with a wide 220 beam angle, and luminous efficiency up to 105 lm/W. These tubes provide Instant-on light, therefore ideally suitable in combination with sensor technology. Very high resistance to switching loads. Also suitable for operation at low temperatures (from -20 to 45). Not suitable for operation with electronic/HF control gear.
AVAILABILITY: In stock
This is a Osram LEDvance 2ft 7.6w LED T8 Tube with a frosted finish.
These tubes are a direct retrofit for old 18w T8 or 20w T12 fluorescent tubes in switch start fittings as they come complete with a Free LED Starter. All you need to do is simply remove the old tube and starter and replace with the LED tube and starter supplied. They can also be used in high frequency fittings, by bypassing the control gear and wiring the fitting live and neutral to one end only.
AVAILABILITY: In stock
Overview
Code: LU-LTL-E27-6055636-4W
Color: Amber
Luminous color: Warm White (2,200K)
Base type: E27
Energy efficiency class: A
Total luminous flux (lm): 230
Power consumption (W): 4W
Average lifetime (hours): 30000
Mercury content (mg Hg): 0.00
Color rendering (Ra): 80
Energy consumption in kWh/1000h: 4.00
Length (cm): 15
Diameter (cm): 3
Light output: 230 lm
AVAILABILITY: In stock
Overview
Code: LU-LTL-E27-6055693-5W
Luminous color: Warm White (2,200K)
Base type: E27
Dimmable? Yes
Energy efficiency class: A
Total luminous flux (lm): 260
Power consumption (W): 5W
Average lifetime (hours): 30000
Mercury content (mg Hg): 0.00
Color rendering (Ra): 80
Energy consumption in kWh/1000h: 5.00
Length (cm): 25
Diameter (cm): 3.2
Light output: 260 lm






























Reviews
There are no reviews yet.