Osram LED 10W Value CL A75 827 220-240V FR E27

This is a Osram LEDvance 2ft 7.6w LED T8 Tube with a frosted finish.
These tubes are a direct retrofit for old 18w T8 or 20w T12 fluorescent tubes in switch start fittings as they come complete with a Free LED Starter. All you need to do is simply remove the old tube and starter and replace with the LED tube and starter supplied. They can also be used in high frequency fittings, by bypassing the control gear and wiring the fitting live and neutral to one end only.

Overview:

Areas of Application: Residential, Home, Store, Hotel, Supermarket
Base Type: E27
Beam Angle (): 360
Certification: CE, FCC, RoHS
Color Rendering Index – CRI (Ra>): 80-90
Color Temperature (CCT): Warm White
Input Voltage (V): AC110-240V
Item Type: Antique Edison
Lamp Body Material: Glass
Lamp Luminous Efficiency (lm/w): 100
Lamp Luminous Flux (lm): 600~650
LED Light Source: LED
Light Source: LED
Power Supply: Electric
Size: 64 x 142mm
Warranty (Year): 2-Year
Warranty: 1 Years
Working Lifetime (Hour): 20000
Working Temperature (): -15 to 40

Specifications:

Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 50000h
Switching cycle: 50000X

Product Description:

Wattage: 12 Watts
Voltage: 220-240 Volts
Enclosure Material: Polycarbonate
Product Color: White
Product Dimensions (L x B x H): 7cm x 14cm x 13cm
Bulb type: LED
Base Type: Screw
Cap Type: E27
Light Color: Warm White
Light Temperature: 3000 Kelvin
Luminosity: 1200 Lumens

Specifications:

Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 50000h
Switching cycle: 50000X

Specifications:

Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 50000h
Switching cycle: 50000X

Specifications:

Cap base: G13 (Medium Bi-Pin Fluorescent)
EU RoHS compliant: Yes
Nominal lifetime (nom.): 15000h
Switching cycle: 50,000X

Specifications:

Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 60000h
Switching cycle: 50000X

This is a Osram LEDvance 5ft 1500mm 19.1w LED T8 Tube with a frosted finish.
These tubes are a direct retrofit for old 58w T8 or 65w T12 fluorescent tubes in switch start fittings as they come complete with a Free LED Starter. All you need to do is simply remove the old tube and starter and replace with the LED tube and starter supplied. They can also be used in high frequency fittings, by bypassing the control gear and wiring the fitting live and neutral to one end only.

Technical Parameters:

Color: Warm White (3000K)
Certifications: CE
CRI: Ra 80%
Heating Time: < 1s
Ignition Time: < 0.5s
Beam Angle: 270
Luminous flux: 560 lm
On/Off Cycles: > 15000
Voltage: 230V
Replacement: 45W
Power consumption: 7W
LED type: SMD 2835
Socket: E27
Dimmer: No
Power factor: > 50
Lumen maintenance: > 70%
Dimension: 60 x 120mm
Lifespan: 20000h

Overview:

Areas of Application: Office, indoor, school, mark
Lamp Body Material: Iron
Warranty (Years): 2

Overview:

Osram LED T8 SubstiTUBE Value 2ft in 4000K (840) for EMag/Mains, is an economic LED tube for electromagnetic control gears or direct wire to Mains. A quick, simple and safe replacement without rewiring (comes with jumper starter), offering energy savings of up to 65% (compared to T8 fluorescent lamp on CCG), with a wide 220 beam angle, and a luminous efficacy up to 105 lm/W. These tubes provide Instant-on light, therefore ideally suitable in combination with sensor technology. Very high resistance to switching loads. Also suitable for operation at low temperatures (from -20 to 45). Not suitable for operation with electronic/HF control gear.