Fronius Symo GEN24 6.0 Plus with OVP

Solar Inverter

Code: LUMI-SI-SYMO-GEN24-6-0-P

Brand: Fronius

Component: Inverter

Type: SYMO GEN24 6.0 PLUS

Solar Inverter Input Data

Number MPP trackers: 2

DC input voltage range (Udc min – Udc max): 80 – 1,000 V

Nominal input voltage (Udc,r): 610 V

Feed-in start voltage (Udc start): 80 V

Usable MPP voltage range: 80 – 800 V

Solar Inverter Output Data

AC rated power (Pac,r): 6,000 W

Apparent power: 6,000 VA

Max. output power: 6,000 VA

Grid connection (Uac,r): 3-NPE 400 V / 230 V or 3~NPE 380 V / 220 V (+20 % / -30 %)

Frequency (frequency range fmin – fmax): 50 Hz / 60 Hz (45 – 65 Hz)

Total harmonic distortion: < 3.5 %Power factor (cos ac,r): 0.7 – 1 ind. / cap.

Solar Inverter Output Data PV Point

Nom. output power PV Point: 3,000 VA

Grid connection PV Point: 1~ NPE 220 V / 230 V

Switching time: < 20 sec.

Solar Inverter Output Data Full Backup {2*}

Nom. output power Full Backup: 6,000 VA

Nominal phase power Full Backup: 3,680 VA

Grid connection Full Backup: 3~ NPE 400 V / 230 V or 3~ NPE 380 V / 220 V

Switching time: < 35 sec.

Solar Inverter Battery Connection

Number of DC inputs: 1

Max. input current (Idc max): 22 A

DC input voltage range (Udc min – Udc max): 160 V – 531 V

DC battery connection technology: 1x BATT+ and 1x BATT- push-in spring terminals 2.5 – 10 square mm

Max. DC input/output power {3*}: 6,220 W

Max. charging power for AC coupling {3*}: 6,000 W

Compatible batteries {4*}: BYD Battery-Box Premium HVS/HVM {5*} & LG RESU FLEX

Solar Inverter General Data

Dimensions (height x width x depth): 595 × 529 × 180 mm

Weight (inverter/with packaging): 23.4 Kg / 28.5 Kg

Protection class: IP 66

Safety class: 1

Night consumption: < 10 WOvervoltage category (DC / AC) {6*}: 2 / 3

Inverter concept: Transformerless

Cooling: Active Cooling technology

Installation: Indoor and outdoor installation

Ambient temperature range: -25 to +60

Permissible humidity: 0 – 100 %

Noise emissions: < 47 dB (A)Max. altitude above sea level: 3,000m / 4,000m (unrestricted/restricted voltage range)

DC connection technology PV: 3x DC+ and 3x DC- push-in spring terminals 2.5 – 10 square mm

AC connection technology: 5-pin AC push-in spring terminals 1.5 – 10 square mm; 3-pin backup power push-in spring terminals 1.5 – 10 square mm; 5x PE screw terminals 2.5 – 16 square mm

Certificates and compliance with standards {7*}: IEC 62109, IEC 62116, IEC 61727, IEC 62909, VDE 0126, VDE AR-N4105, AS/NZS 4777.2, EN 50549, CEI 0-21, G98/G99, R25

Backup power functions: PV Point

Life cycle analysis: In accordance with ONORM EN ISO 14040 and 14044 (checked by employees from Fraunhofer IZM)

{1*} I sc pv = I sc max  I sc (STC) x 1,25 according to e.g. IEC 60364-7-712, NEC 2020, AS/NZS 5033:2021.

{2*} The Full Backup option is available for the Symo GEN24 6.0-10.0 Plus. Additional external components for grid switchover are required for the Full Backup. See the Operating Instructions for further details.

{3*} Depending on connected battery

{4*} Depending on the country-specific certification and availability

{5*} Excluding BYD Battery-Box Premium HVS 12.8 and HVM 8.3

{6*} In line with IEC 62109-1. Option to retrofit surge protection device DC SPD type 1+2 for 2 MPP trackers available under the following item number: 4,240,313,CK

PDF Download(s): Datasheet