Schneider Solar Charge Controller Conext MPPT 60 2.5W 150VDC Price in Nairobi Kenya
Solar Charge Controller
Code: LUMI-SCC-ES-865-1030-1
Brand: Schneider
Component: Charge Controller
Power consumption, nighttime: 2.5 W
Nominal battery voltage: 12, 24, 36, 48, 60 V
Battery voltage operating range: 0 Vdc to 80 Vdc
Max PV operating voltage: 140 V
Max. array short-circuit current: 60 A (48 A @ STC)
Max PV array rating: 5250 W
Max. charge current: 60 A (for all battery voltages except 60 V)
Max. output power: 3500 W
Show more
Show less
-
Inquire
- |
-
Details
- |
-
More info
- |
-
Reviews (0)
- |
Solar Charge Controller
Conext MPPT 60 150 PV Solar Charge Controller for MPPT multi-stage charging and better battery life.
The Conext MPPT 60 150 is a photovoltaic (PV) charge controller that tracks the maximum power point of a PV array to deliver the maximum available current for charging batteries. When charging, the MPPT 60 150 regulates battery voltage and output current based on the amount of energy available from the PV array and the state of charge of the battery.
Higher return on investment
– Maximum Power Point Tracking (MPPT) algorithm continually seeks the maximum power available from the PV array
– Improve battery life with selectable multi-stage temperature-compensated charging
– Five-year standard warranty
Flexible
– Stand-alone application or full integration with Conext XW Pro, XW, and SW inverter chargers
– Compatible with any brand of PV module
– Remote monitoring available
Easy to install
– Configurable auxiliary output
– LCD screen with faceplate buttons for configuration and system monitoring
– Integrated PV ground fault protection for negative grounded arrays
Electrical specifications
Nominal battery voltage: 12, 24, 36, 48, 60 V
Battery voltage operating range: 0 Vdc to 80 Vdc
Min. PV operating voltage: Battery voltage +5 V
Max PV operating voltage: 140 V
Max. PV array open circuit voltage: 150 V including temperature correction factor
Max. array short-circuit current: 60 A (48 A @ STC)
Max PV array rating: 5250 W
Max. charge current: 60 A (for all battery voltages except 60 V)
Max. and min. wire size in conduit: #6 AWG to #14 AWG (10 to 2.5 square millimeters)
Max. output power: 3500 W
Charger regulation method: Three-stage (bulk, absorption, float) plus manual equalization. Two-stage (bulk, absorption) plus manual equalization
Supported battery types: Flooded, GEL, AGM, Custom
Efficiency
Max. power conversion efficiency: 93% (nominal 12 V), 96% (nominal 24 V), 97% (nominal 36 V), 98% (nominal 48 V), 99% (nominal 60 V)
General specifications
Power consumption, nighttime: 2.5 W
Battery temperature sensor: Included
Auxiliary output: 5 – 13 V, up to 200 mA
Enclosure material: Indoor, ventilated, sheet metal chassis with 2.2 cm and 2.8 cm (7/8 in and 1 in) knockouts and aluminum heat-sink
IP degree of protection: IP20
Product weight: 4.8 kg (10.8 lb)
Shipping weight: 8.0 kg (17.6 lb)
Product dimensions (H x W x D): 36.8 x 14.6 x 13.8 cm (14.5 × 5.8 × 5.5 in)
Shipping dimensions (H x W x D): 48.3 x 22.9 x 35 cm (19.0 × 9.0 × 9.8 in)
Device mounting: Vertical wall mount
Ambient air temperature for operation: -20 to 45 degrees Celsius
Storage temperature range: -40 to 85 degrees celsius full power, power derating above 45 degrees Celsius
Operating altitude: Sea level to 2000 m (6562 ft)
System network and remote monitoring: Available with Insight Energy Management
OEM: 865-1030-1
Code: LUMI-SCC-ES-865-1030-1
Brand: Schneider
Component: Charge Controller
OEM: ES-865-1030-1
PDF Download(s): Datasheet
| Weight | 6.2 kg |
|---|---|
| Dimensions | 488 × 245 × 238 mm |
AVAILABILITY: In stock
Solar Panel
Code: LU-SP-20W-12V-DC
Power: 20w – 12v
20 Watt 12 Volt Solar Panel
This is a universal 12 volt dc / 20 watt solar panel suitable for a variety of applications. Supplied with tempered glass and an aluminum frame. Easy ve and -ve connection to the terminal block located on the back of the solar panel.
AVAILABILITY: In stock
Solar Street Light
Code: LU-SSL-40W-140W-6M
Solar Street Light 40/140 Watts 6 meters available here in Kenya
Power Consumption: 40W-140W
Different models of LED street light and pole set available
Automatic on/off, light/time intelligent control, dimmable mode
AVAILABILITY: In stock
Solar Street Light
Code: LU-SSL-20W-70W-4M
Solar Street Light 20-70 Watts 4 meters available here in Kenya
Power Consumption: 20W-70W
Different models of LED street light and pole set available
Automatic on/off, light/time intelligent control, dimmable mode
AVAILABILITY: In stock
Solar Panel
Code: LU-SP-100W-12V-DC
Power: 100w – 12v
100 Watt 12 Volt Solar Panel
This is a universal 12 volt dc / 100 watt solar panel suitable for a variety of applications. Supplied with tempered glass and an aluminum frame. Easy ve and -ve connection to the terminal block located on the back of the solar panel.
AVAILABILITY: In stock
Solar Garden Light
Code: LU-SGL-7W-25W-3M
Power Consumption: 7W-25W
High efficiency polycrystalline solar panel
Durable, shockproof, safe actual application
Soft, anti-glare design, High brightness LED light source
AVAILABILITY: In stock
Solar Street Light
Code: LU-SSL-70W-240W-8M
Solar Street Light 70/240 Watts 8 meters available here in Kenya
Power Consumption: 70W-240W
Different models of LED street light and pole set available
Automatic on/off, light/time intelligent control, dimmable mode
AVAILABILITY: In stock
Solar Panel
Code: LU-SP-40W-12V-DC
Power: 40w – 12v
40 Watt 12 Volt Solar Panel
This is a universal 12 volt dc / 40 watt solar panel suitable for a variety of applications. Supplied with tempered glass and an aluminum frame. Easy ve and -ve connection to the terminal block located on the back of the solar panel.
AVAILABILITY: In stock
Solar Garden Light
Code: LU-SGL-12W-35W-3.5M
Power Consumption: 12W-35W
High efficiency polycrystalline solar panel
Durable, shockproof, safe actual application
Soft, anti-glare design, High brightness LED light source
AVAILABILITY: In stock
Solar Battery
Code: LU-SB-RR-SF-SL
We offer a choice of sealed lead acid batteries in a variety of different sizes, voltages and specifications to support most of the solar lights that we sell. This series of batteries are suited for our smaller floodlights, sign light, and Christmas light systems. If you are unsure on the correct battery type, use the information on the existing battery or in the product specification. Each battery is sold as a single unit. Battery manufacturers may vary.
Performance Maintenance free sealed lead acid battery, or lithium. Check the specifications of your system to determine the appropriate replacement battery. Choices available: 4 Volt 4.5 Amp-Hr 6 Volt 4.5 Amp-Hr 6 Volt 6 Amp-Hr 12 Volt 2.8 Amp-Hr 12 Volt 4.5 Amp-Hr 12 Volt 5 Amp-Hr
AVAILABILITY: In stock
Solar Charge Controller
Code: LU-SCC-12V-24V-MPPT-01
Power: 12v – 24v
This is the most sophisticated MPPT Solar Charge Controller and Light Activator offered by Solar Illuminations. This programmable controller regulates and manages the solar panel power, battery power, and controls lighting activation. It also offers a variety of unique features not offered by other MPPT Charge Controllers. It automatically recognizes 12V or 24V battery configurations and can handle up to 100V of solar panel input with a maximum of 10A. The light activator has multiple modes including manual on/off, dust to dawn, timer mode, and dual timer mode. MPPT Charge Controllers are typically 30% more efficient than a regular PWM solar charge controllers. This is the best technology for large solar systems requiring the most efficient technology.
AVAILABILITY: In stock
Solar Panel
Code: LU-SP-6W-12V-DC
Power: 6w – 12v
6 Watt 12 Volt Solar Panel
This is a universal 12 volt dc / 6 watt solar panel suitable for a variety of applications. Supplied with tempered glass and an aluminum frame. Easy ve and -ve connection to the terminal block located on the back of the solar panel.
AVAILABILITY: In stock
Solar Charge Controller
Code: LU-SCC-12V-24V-PWM-02
Power: 12v – 24v
This PWM type charge controller is suitable for 12 volt or 24 volt DC panels and has a dual timer option. Rated at 20 Amp max. It can be used as a standalone charge controller or the solar panel can act as a photocell for controlled lighting use. This control module offers a dual timer mode which allows two on/off times per night, dusk till dawn, and standard single time mode. For example this control module in dual timer mode will allow a light to run from sun set for x hours (2-7 hours), off for a calculated time, and back on x hours (1-5 hours) before sun rise. The calculated off time is automatically determined by the charge controller based on the previous night’s characteristic.
















Reviews
There are no reviews yet.