Lumitek 3-Light Modern K9 Crystal Ceiling Chandelier Pendant Lighting

Overview:

Areas of Application: Office, indoor, school, mark etc.
Lamp Body Material: Iron
Warranty (Years): 2

Overview:

Areas of Application: Office, indoor, school, mark
Lamp Body Material: Iron
Warranty (Years): 2

This is a Osram LEDvance 4ft 1200mm 16.4w LED T8 Tube with a frosted finish.
These tubes are a direct retrofit for old 36w T8 or 40w T12 fluorescent tubes in switch start fittings as they come complete with a Free LED Starter. All you need to do is simply remove the old tube and starter and replace with the LED tube and starter supplied. They can also be used in high frequency fittings, by bypassing the control gear and wiring the fitting live and neutral to one end only.

Overview:

Osram LED T8 SubstiTUBE Value 5ft in 4000K (840) for EMag/Mains, is an economic LED tube for electromagnetic control gears or direct wire to Mains. A quick, simple and safe replacement without rewiring (comes with jumper starter), offering energy savings of up to 65% (compared to T8 fluorescent lamp on CCG), with a wide 220 beam angle, and luminous efficiency up to 105 lm/W. These tubes provide Instant-on light, therefore ideally suitable in combination with sensor technology. Very high resistance to switching loads. Also suitable for operation at low temperatures (from -20 to 45). Not suitable for operation with electronic/HF control gear.

Overview:

Areas of Application: Office, Hotel, Home
Carton Size: 126 x 20 x 17.5
Certification: CCC, CE, ETL, LVD, RoHS, SAA
Input Voltage (V): AC85-265V
IP Rating: IP33
Item Type: LED tube light bracket
Item Types: 0.6m 8W, 0.9m 12W, 1.2m 16W
Lamp Body Material: Metal
Warranty (Year): 1-Year
Warranty (Years): 3
Working Lifetime (Hour): 50000
Working Temperature (): -15 to 45

This is a Osram LEDvance 5ft 1500mm 19.1w LED T8 Tube with a frosted finish.
These tubes are a direct retrofit for old 58w T8 or 65w T12 fluorescent tubes in switch start fittings as they come complete with a Free LED Starter. All you need to do is simply remove the old tube and starter and replace with the LED tube and starter supplied. They can also be used in high frequency fittings, by bypassing the control gear and wiring the fitting live and neutral to one end only.

Overview:

Certification: CE, RoHS
Finish: Gold
Item Type: European Bedroom Wall Lamp
Light Source: LED E14/E12 x 2, Energy Saving
Material: Iron and fabric
Shade Color: White or black
Voltage: 110-240V

Specifications:

Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 50000h
Switching cycle: 50000X

Specifications:

Cap base: G13 (Medium Bi-Pin Fluorescent)
EU RoHS compliant: Yes
Nominal lifetime (nom.): 15000h
Switching cycle: 50,000X

Overview:

Finish: Rustic painting
Item Type: European Crystal wall lamp
Light Source: LED E14/E12 bulbs, Energy Saving
Main materials: Iron and crystal
Material: Iron
Voltage: 110-240V

Specifications:

Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 60000h
Switching cycle: 50000X

Overview:

Osram LED T8 SubstiTUBE Value 2ft in 4000K (840) for EMag/Mains, is an economic LED tube for electromagnetic control gears or direct wire to Mains. A quick, simple and safe replacement without rewiring (comes with jumper starter), offering energy savings of up to 65% (compared to T8 fluorescent lamp on CCG), with a wide 220 beam angle, and a luminous efficacy up to 105 lm/W. These tubes provide Instant-on light, therefore ideally suitable in combination with sensor technology. Very high resistance to switching loads. Also suitable for operation at low temperatures (from -20 to 45). Not suitable for operation with electronic/HF control gear.