Lumitek Modern Round 10-Branch Belt Clear Chandelier Lamp
The crystal chandelier adds a stylish feeling for any indoor decoration, including amenities, bedroom, bathroom, wardrobe, hotel, restaurant, saloon bar, lounge, celebration, wedding, or tent lamp.
Easy to install: all components and can be directly mounted directly into the standard ceiling fixture.
Show more
Show less
-
Inquire
- |
-
Details
- |
-
Reviews (0)
- |
The crystal chandelier adds a stylish feeling for any indoor decoration, including amenities, bedroom, bathroom, wardrobe, hotel, restaurant, and saloon bar, lounge, celebrations, wedding, or tent lamp.
Easy to install: all components and can be directly mounted directly into the standard ceiling fixture.
Technical Details:
Color: 10 Black and clear Light
Material: Crystal
Size: 8 heads, 158 x 90 x 55cm
Light Source: LED light
If the bulb is a dimming bulb, check the rated power of the dimmer switch before use.
Suggested size of the room: 20-30 square meters (for reference only)
Areas of Application: Exhibition hall, kitchen, hotel room
AVAILABILITY: In stock
Overview:
Areas of Application: Bedroom living room hotel
Color: Gold
Item Type: Postmodern, Modern, Luxury Wall Lamp
Lamp Body Material: Glass and stainless steel
Light Source: E14 bulbs
Lighting Solution Services Available: Lighting and circuitry design. (For these additional services, please fill in the Inquire Form below to get assistance and the best quote)
Material: glass and stainless steel
Shade Material: Glass
Size: 200 x 600mm
Warranty (Year): 2-Year
AVAILABILITY: In stock
Specifications:
Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 50000h
Switching cycle: 50000X
AVAILABILITY: In stock
This is a Osram LEDvance 5ft 1500mm 19.1w LED T8 Tube with a frosted finish.
These tubes are a direct retrofit for old 58w T8 or 65w T12 fluorescent tubes in switch start fittings as they come complete with a Free LED Starter. All you need to do is simply remove the old tube and starter and replace with the LED tube and starter supplied. They can also be used in high frequency fittings, by bypassing the control gear and wiring the fitting live and neutral to one end only.
AVAILABILITY: In stock
Specifications:
Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 60000h
Switching cycle: 50000X
AVAILABILITY: In stock
Product Details:
Philips MASTER TL5 High Efficiency
The Philips Lighting MASTER TL5 High Efficiency is an extremely efficient TL5 lamp with a tubular 16mm envelope. This high efficiency TL5 tube lamp saves considerable energy by simple direct replacement. The MASTER TL5 HE is specifically designed to operate with current electronic gear and well suited for dimming. This High efficiency tube lamp is ideally suited for recessed, surface mounted and suspended luminaires and offers high quality, energy efficient lighting. The MASTER TL5 HE is ideal in applications in offices, shops, schools, public building and industry.
AVAILABILITY: In stock
Overview:
Osram LED T8 SubstiTUBE Value 2ft in 4000K (840) for EMag/Mains, is an economic LED tube for electromagnetic control gears or direct wire to Mains. A quick, simple and safe replacement without rewiring (comes with jumper starter), offering energy savings of up to 65% (compared to T8 fluorescent lamp on CCG), with a wide 220 beam angle, and a luminous efficacy up to 105 lm/W. These tubes provide Instant-on light, therefore ideally suitable in combination with sensor technology. Very high resistance to switching loads. Also suitable for operation at low temperatures (from -20 to 45). Not suitable for operation with electronic/HF control gear.
AVAILABILITY: In stock
Specifications:
Cap base: G13 (Medium Bi-Pin Fluorescent)
EU RoHS compliant: Yes
Nominal lifetime (nom.): 15000h
Switching cycle: 50,000X
AVAILABILITY: In stock
Specifications:
Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 60000h
Switching cycle: 50000X
AVAILABILITY: In stock
Overview:
Osram LED T8 SubstiTUBE Value 4ft in 6500K (865) for EMag/Mains, is an economic LED tube for electromagnetic control gears or direct wire to Mains. A quick, simple and safe replacement without rewiring (comes with jumper starter), offering energy savings of up to 65% (compared to T8 fluorescent lamp on CCG), with a wide 220 beam angle, and luminous efficiency up to 105 lm/W. These tubes provide Instant-on light, therefore ideally suitable in combination with sensor technology. Very high resistance to switching loads. Also suitable for operation at low temperatures (from -20 to 45). Not suitable for operation with electronic/HF control gear.
AVAILABILITY: In stock
Overview:
Areas of Application: Bedroom
Certification: CE, RoHS
Color Rendering Index – CRI (Ra>): 70
Input Voltage (V): 111V-240V
Is dimmer supported? No
Item Type: Modern and Postmodern Wall Lamp Luxury Light
Lamp Body Material: Copper and crystal
Lamp Luminous Efficiency (lm/w): 80
Lamp Luminous Flux (lm): 3500
Lamp size: Diameter 18 x Height 50 x 11.5
LED Shade Type: crystal
Lifespan (hours): 50000
Light color: Warm White Light
Light Source: LED, LED-E14
Lighting Solution Services Available: Lighting and circuitry design. (For these additional services, please fill in the Inquire Form below to get assistance and the best quote)
Main material: Copper and crystal
Product Name: Bedside crystal wall lamp
Voltage: 111V-240V
Warranty (Year): 3-Year
Warranty: 3 Years
Working Lifetime (Hour): 50000
Working Time (hours): 50000
AVAILABILITY: In stock
Overview:
Areas of Application: Office, Hotel, Home
Carton Size: 126 x 20 x 17.5
Certification: CCC, CE, ETL, LVD, RoHS, SAA
Input Voltage (V): AC85-265V
IP Rating: IP33
Item Type: LED tube light bracket
Item Types: 0.6m 8W, 0.9m 12W, 1.2m 16W
Lamp Body Material: Metal
Warranty (Year): 1-Year
Warranty (Years): 3
Working Lifetime (Hour): 50000
Working Temperature (): -15 to 45
AVAILABILITY: In stock
This is a Osram LEDvance 4ft 1200mm 16.4w LED T8 Tube with a frosted finish.
These tubes are a direct retrofit for old 36w T8 or 40w T12 fluorescent tubes in switch start fittings as they come complete with a Free LED Starter. All you need to do is simply remove the old tube and starter and replace with the LED tube and starter supplied. They can also be used in high frequency fittings, by bypassing the control gear and wiring the fitting live and neutral to one end only.
Reviews
There are no reviews yet.