Lumitek White LED Pendant with Clear Opal Acrylic Shade 3×31.5W

Overview:

Osram LED T8 SubstiTUBE Value 4ft in 6500K (865) for EMag/Mains, is an economic LED tube for electromagnetic control gears or direct wire to Mains. A quick, simple and safe replacement without rewiring (comes with jumper starter), offering energy savings of up to 65% (compared to T8 fluorescent lamp on CCG), with a wide 220 beam angle, and luminous efficiency up to 105 lm/W. These tubes provide Instant-on light, therefore ideally suitable in combination with sensor technology. Very high resistance to switching loads. Also suitable for operation at low temperatures (from -20 to 45). Not suitable for operation with electronic/HF control gear.

Specifications:

Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 60000h
Switching cycle: 50000X

Overview:

Areas of Application: Office, indoor, school, mark etc.
Lamp Body Material: Iron
Warranty (Years): 2

Specifications:

Cap base: G13 (Medium Bi-Pin Fluorescent)
EU RoHS compliant: Yes
Nominal lifetime (nom.): 15000h
Switching cycle: 50,000X

Overview:

Areas of Application: Office, indoor, school, mark etc.
Lamp Body Material: Iron
Warranty (Years): 2

Overview:

Finish: Rustic painting
Item Type: European Crystal wall lamp
Light Source: LED E14/E12 bulbs, Energy Saving
Main materials: Iron and crystal
Material: Iron
Voltage: 110-240V

This is a Osram LEDvance 4ft 1200mm 16.4w LED T8 Tube with a frosted finish.
These tubes are a direct retrofit for old 36w T8 or 40w T12 fluorescent tubes in switch start fittings as they come complete with a Free LED Starter. All you need to do is simply remove the old tube and starter and replace with the LED tube and starter supplied. They can also be used in high frequency fittings, by bypassing the control gear and wiring the fitting live and neutral to one end only.

This is a Osram LEDvance 2ft 7.6w LED T8 Tube with a frosted finish.
These tubes are a direct retrofit for old 18w T8 or 20w T12 fluorescent tubes in switch start fittings as they come complete with a Free LED Starter. All you need to do is simply remove the old tube and starter and replace with the LED tube and starter supplied. They can also be used in high frequency fittings, by bypassing the control gear and wiring the fitting live and neutral to one end only.

Overview:

Areas of Application: Bedroom
Certification: CE, RoHS
Color Rendering Index – CRI (Ra>): 70
Input Voltage (V): 111V-240V
Is dimmer supported? No
Item Type: Modern and Postmodern Wall Lamp Luxury Light
Lamp Body Material: Copper and crystal
Lamp Luminous Efficiency (lm/w): 80
Lamp Luminous Flux (lm): 3500
Lamp size: Diameter 18 x Height 50 x 11.5
LED Shade Type: crystal
Lifespan (hours): 50000
Light color: Warm White Light
Light Source: LED, LED-E14
Lighting Solution Services Available: Lighting and circuitry design. (For these additional services, please fill in the Inquire Form below to get assistance and the best quote)
Main material: Copper and crystal
Product Name: Bedside crystal wall lamp
Voltage: 111V-240V
Warranty (Year): 3-Year
Warranty: 3 Years
Working Lifetime (Hour): 50000
Working Time (hours): 50000

Specifications:

Cap base: G13 (Medium Bi-Pin Fluorescent)
EU RoHS compliant: Yes
Nominal lifetime (nom.): 15000h
Switching cycle: 50,000X

Overview:

Areas of Application: Office, indoor, school, mark
Lamp Body Material: Iron
Warranty (Years): 2

This is a Osram LEDvance 5ft 1500mm 19.1w LED T8 Tube with a frosted finish.
These tubes are a direct retrofit for old 58w T8 or 65w T12 fluorescent tubes in switch start fittings as they come complete with a Free LED Starter. All you need to do is simply remove the old tube and starter and replace with the LED tube and starter supplied. They can also be used in high frequency fittings, by bypassing the control gear and wiring the fitting live and neutral to one end only.