Lumitek Matt White LED Pendant with Clear Opal Acrylic Shade 1x87W

Overview:

Areas of Application: Residential
Certification: CE, FCC, SAA
Color Rendering Index – CRI (Ra>): 90
Input Voltage (V): 85-265
Item Type: Contemporary
Lamp Body Material: Stainless Steel
Lamp Holder: E26/E27
Lamp Luminous Flux (lm): 80
LED Light Source: E14
Lighting Solution Services Available: Lighting and circuitry design. (For these additional services, please fill in the Inquire Form below to get assistance and the best quote)
Material: Steel and crystal
Reading Lights: Max 40W
Shade Material: Crystal
Size: 280 x 380mm
Warranty (Year): 3-Year
Working Lifetime (Hour): 50000

Specifications:

Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 50000h
Switching cycle: 50000X

Overview:

Osram LED T8 SubstiTUBE Value 4ft in 6500K (865) for EMag/Mains, is an economic LED tube for electromagnetic control gears or direct wire to Mains. A quick, simple and safe replacement without rewiring (comes with jumper starter), offering energy savings of up to 65% (compared to T8 fluorescent lamp on CCG), with a wide 220 beam angle, and luminous efficiency up to 105 lm/W. These tubes provide Instant-on light, therefore ideally suitable in combination with sensor technology. Very high resistance to switching loads. Also suitable for operation at low temperatures (from -20 to 45). Not suitable for operation with electronic/HF control gear.

Overview:

Areas of Application: Office, indoor, school, mark etc.
Lamp Body Material: Iron
Warranty (Years): 2

Specifications:

Cap base: G13 (Medium Bi-Pin Fluorescent)
EU RoHS compliant: Yes
Nominal lifetime (nom.): 15000h
Switching cycle: 50,000X

Overview:

Areas of Application: Office, indoor, school, mark etc.
Lamp Body Material: Iron
Warranty (Years): 2

Overview:

Osram LED T8 SubstiTUBE Value 5ft in 4000K (840) for EMag/Mains, is an economic LED tube for electromagnetic control gears or direct wire to Mains. A quick, simple and safe replacement without rewiring (comes with jumper starter), offering energy savings of up to 65% (compared to T8 fluorescent lamp on CCG), with a wide 220 beam angle, and luminous efficiency up to 105 lm/W. These tubes provide Instant-on light, therefore ideally suitable in combination with sensor technology. Very high resistance to switching loads. Also suitable for operation at low temperatures (from -20 to 45). Not suitable for operation with electronic/HF control gear.

Specifications:

Cap base: G13 (Medium Bi-Pin Fluorescent)
EU RoHS compliant: Yes
Nominal lifetime (nom.): 15000h
Switching cycle: 50,000X

Overview:

Areas of Application: Living Room, Restaurant, Lobby, Hotel, Loft, Club, Restaurant
Certification: CCC, CE, RoHS, SAA, FCC
Color Rendering Index – CRI (Ra>): 80
Color Temperature (CCT): 4100K (Neutral White)
Color: Gold
Input Voltage (V): 110-240
Is dimmer supported? No
Item Type: Modern Wall Lamp
Lamp Body Material: Crystal
Lamp Luminous Flux (lm): 1200
LED Light Source: G4, G9, E14, or E27
Lifespan (hours): 30000
Light Source: Energy Saving
Lighting Solution Services Available: Project Installation. (For these additional services, please fill in the Inquire Form below to get assistance and the best quote)
Shade Material: Crystal
Warranty (Year): 1-Year
Working Lifetime (Hour): 20000
Working Time (hours): 30000

Product Details:

Philips MASTER TL5 High Efficiency
The Philips Lighting MASTER TL5 High Efficiency is an extremely efficient TL5 lamp with a tubular 16mm envelope. This high efficiency TL5 tube lamp saves considerable energy by simple direct replacement. The MASTER TL5 HE is specifically designed to operate with current electronic gear and well suited for dimming. This High efficiency tube lamp is ideally suited for recessed, surface mounted and suspended luminaires and offers high quality, energy efficient lighting. The MASTER TL5 HE is ideal in applications in offices, shops, schools, public building and industry.

Specifications:

Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 50000h
Switching cycle: 50000X

This is a Osram LEDvance 2ft 7.6w LED T8 Tube with a frosted finish.
These tubes are a direct retrofit for old 18w T8 or 20w T12 fluorescent tubes in switch start fittings as they come complete with a Free LED Starter. All you need to do is simply remove the old tube and starter and replace with the LED tube and starter supplied. They can also be used in high frequency fittings, by bypassing the control gear and wiring the fitting live and neutral to one end only.