Lumitek Matt BK and SN Pendant E26x9
Overview
Code: LU-CSP-BP-MT4209-9C
Name: Pendant
Watt: E26x9
Color: Matt BK and SN
Shade: –
Size (mm): 78 x H40cm
Show more
Show less
-
Inquire
- |
-
Details
- |
-
Reviews (0)
- |
Product Description
IP Rating: IP20
Color: Matt BK and SN
Installation: Pendant
Material: Iron
Power Consumption: E26x9
Power Source: E26
Driver: –
Operating Temperature: -20 till 40
Dimmable: NO
Lifetime: –
Photometric Data
LED Type: –
Luminous Flux: –
Color Temperature: –
Beam Angle: –
UGR: –
AVAILABILITY: In stock
Overview:
Areas of Application: Office, indoor, school, mark
Lamp Body Material: Iron
Warranty (Years): 2
AVAILABILITY: In stock
Overview:
Areas of Application: Residential
Certification: CE, FCC, SAA
Color Rendering Index – CRI (Ra>): 90
Input Voltage (V): 85-265
Item Type: Contemporary
Lamp Body Material: Stainless Steel
Lamp Holder: E26/E27
Lamp Luminous Flux (lm): 80
LED Light Source: E14
Lighting Solution Services Available: Lighting and circuitry design. (For these additional services, please fill in the Inquire Form below to get assistance and the best quote)
Material: Steel and crystal
Reading Lights: Max 40W
Shade Material: Crystal
Size: 280 x 380mm
Warranty (Year): 3-Year
Working Lifetime (Hour): 50000
AVAILABILITY: In stock
Overview:
Areas of Application: Office, indoor, school, mark etc.
Lamp Body Material: Iron
Warranty (Years): 2
AVAILABILITY: In stock
Overview:
Areas of Application: Living Room, Home, Villa, Hotel, Restaurant, Bar, Club, Residential
Color Rendering Index – CRI (Ra>): 80
Color Temperature (CCT): 3500K (Warm White)
Input Voltage (V): AC 85-265V
Item Type: Modern, European, Nordic, Home Decor Wall Lamp
Lamp Body Material: Brass
LED Light Source: E14
Lifespan (hours): 40000
Light Source: E14
Lighting Solution Services Available: Lighting and circuitry design. (For these additional services, please fill in the Inquire Form below to get assistance and the best quote)
Shade Material: Clear Glass
Warranty (Year): 3-Year
Working Time (hours): 40000
AVAILABILITY: In stock
Overview:
Areas of Application: Office, indoor, school, mark
Lamp Body Material: Iron
Warranty (Years): 2
AVAILABILITY: In stock
Overview:
Osram LED T8 SubstiTUBE Value 2ft in 4000K (840) for EMag/Mains, is an economic LED tube for electromagnetic control gears or direct wire to Mains. A quick, simple and safe replacement without rewiring (comes with jumper starter), offering energy savings of up to 65% (compared to T8 fluorescent lamp on CCG), with a wide 220 beam angle, and a luminous efficacy up to 105 lm/W. These tubes provide Instant-on light, therefore ideally suitable in combination with sensor technology. Very high resistance to switching loads. Also suitable for operation at low temperatures (from -20 to 45). Not suitable for operation with electronic/HF control gear.
AVAILABILITY: In stock
Specifications:
Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 60000h
Switching cycle: 50000X
AVAILABILITY: In stock
Overview:
Areas of Application: Office, indoor, school, mark
Lamp Body Material: Iron
Warranty (Years): 2
AVAILABILITY: In stock
Specifications:
Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 60000h
Switching cycle: 50000X
AVAILABILITY: In stock
Overview:
Osram LED T8 SubstiTUBE Value 4ft in 6500K (865) for EMag/Mains, is an economic LED tube for electromagnetic control gears or direct wire to Mains. A quick, simple and safe replacement without rewiring (comes with jumper starter), offering energy savings of up to 65% (compared to T8 fluorescent lamp on CCG), with a wide 220 beam angle, and luminous efficiency up to 105 lm/W. These tubes provide Instant-on light, therefore ideally suitable in combination with sensor technology. Very high resistance to switching loads. Also suitable for operation at low temperatures (from -20 to 45). Not suitable for operation with electronic/HF control gear.
AVAILABILITY: In stock
Overview:
Areas of Application: Office, indoor, school, mark etc.
Lamp Body Material: Iron
Warranty (Years): 2
AVAILABILITY: In stock
This is a Osram LEDvance 5ft 1500mm 19.1w LED T8 Tube with a frosted finish.
These tubes are a direct retrofit for old 58w T8 or 65w T12 fluorescent tubes in switch start fittings as they come complete with a Free LED Starter. All you need to do is simply remove the old tube and starter and replace with the LED tube and starter supplied. They can also be used in high frequency fittings, by bypassing the control gear and wiring the fitting live and neutral to one end only.
Reviews
There are no reviews yet.