Specifications:
Cap base: G13 (Medium Bi-Pin Fluorescent)
EU RoHS compliant: Yes
Nominal lifetime (nom.): 15000h
Switching cycle: 50,000X
Specifications:
Cap base: G13 (Medium Bi-Pin Fluorescent)
EU RoHS compliant: Yes
Nominal lifetime (nom.): 15000h
Switching cycle: 50,000X
Overview:
Osram LED T8 SubstiTUBE Value 4ft in 6500K (865) for EMag/Mains, is an economic LED tube for electromagnetic control gears or direct wire to Mains. A quick, simple and safe replacement without rewiring (comes with jumper starter), offering energy savings of up to 65% (compared to T8 fluorescent lamp on CCG), with a wide 220 beam angle, and luminous efficiency up to 105 lm/W. These tubes provide Instant-on light, therefore ideally suitable in combination with sensor technology. Very high resistance to switching loads. Also suitable for operation at low temperatures (from -20 to 45). Not suitable for operation with electronic/HF control gear.
98mm
1. Input voltage: AC90-265V
2. Power 3W
3. CCT: 4000K
4. Outline Border: White
5. Installation: Recessed
6. Philips LED Chips
Specifications:
Cap base: G13 (Medium Bi-Pin Fluorescent)
EU RoHS compliant: Yes
Nominal lifetime (nom.): 15000h
Switching cycle: 50,000X
Overview:
Osram LED T8 SubstiTUBE Value 2ft in 4000K (840) for EMag/Mains, is an economic LED tube for electromagnetic control gears or direct wire to Mains. A quick, simple and safe replacement without rewiring (comes with jumper starter), offering energy savings of up to 65% (compared to T8 fluorescent lamp on CCG), with a wide 220 beam angle, and a luminous efficacy up to 105 lm/W. These tubes provide Instant-on light, therefore ideally suitable in combination with sensor technology. Very high resistance to switching loads. Also suitable for operation at low temperatures (from -20 to 45). Not suitable for operation with electronic/HF control gear.
1200*600*32mm
1. Input voltage: AC90-265V
2. SMD2835
3. CRI: >80Ra
4. Power 56W
5. LED Life Span: >50000 Hours
6. Beam Angle: 120
7. CCT: 6500K
8. Outline Border: White
9. PF>0.9
10.PS Diffuser
11. Philips LED Chips
Specifications:
Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 60000h
Switching cycle: 50000X
98mm
1. Input voltage: AC90-265V
2. Power 3W
3. CCT: 3000K
4. Outline Border: White
5. Installation: Recessed
6. Philips LED Chips
Specifications:
Cap-Base: G5 (G5)
EU RoHS compliant: Yes
Nominal Lifetime (Nom): 60000h
Switching cycle: 50000X
595*595*32mm
1. Input voltage: AC90-265V
2. SMD2835
3. CRI: >80Ra
4. Power 40W
5. LED Life Span: >50000 Hours
6. Beam Angle: 120
7. CCT: 4000K
8. Outline Border: White
9. PF>0.9
10.PS Diffuser
11. Philips LED Chips
98mm
1. Input voltage: AC90-265V
2. Power 3W
3. CCT: 6500K
4. Outline Border: White
5. Installation: Recessed
6. Philips LED Chips
Reviews
There are no reviews yet.